Performancecatalog.com

Enter your email address to Sign up for our newsletter

       You are here: Home > Watercraft > Performance Packages > Yamaha > FZR | FZS R&D Stage Kit 1
Sort By:
Page of 1
FZR Stage 1 Intercooler Core Kit
SHO/FZR Stage 1 Intercooler Core Kit
The new R&D Performance Intercooler Power Core Kit was developed to replace the over restrictive OEM intercooler with an inexpensive direct replacement core that will bolt in to the OEM stock location with all stock hardware. The R&D Intercooler Core reduces the deadhead air restriction (similar to the R&D Intake Core Kit) that is created when installing a C1 Monster compressor wheel with a 3-4 pound boost pressure gain. The R&D intercooler offers better cooling efficiency with an aluminum 8 core design over the stock copper 6 core design. The R&D core will flow more air, offer better cooling efficiency, and allow the C1 Monster Wheel to live up to its airflow volume potential.

Our Price: $499.95
Qty Add
Yamaha SHO C1 Monster Charger Wheel
C1 Monster Charger Wheel - Yamaha SHO / FZR
R&D’s new C1 11 Blade Series Monster Compressor Wheel Kit for Yamaha SHO/FZ/FZR engines is new and improved for 2009. The C1-11 will deliver “horsepower you can feel” with instant throttle response, improved mid range acceleration, and increased top end performance. The R&D Monster Wheel replaces the stock wheels inefficient 5 blade design with an all new modern low profile, high flow, 11 blade high tech design. The R&D Monster Wheel will deliver an increase of 3-3.5 pounds of boost pressure with a 1.5-2.0 pound per minute airflow gain. The R&D C1-11 Monster Wheel fits directly into the O.E.M. stock compressor housing for a “no modifications” bolt on and go part. The C1-11 Monster works with the OEM intercooler, OEM fuel injectors, OEM ignition system and the R&D Intake CFM Kit. Kit performs well on 91 octane pump gasoline. Boost rated 7/8.5 P.S.I. (7 @ 7500 and 8.5 @ 7700) Horsepower increases were professionally documented by MOTEC AUSTRALIA

Our Price: $429.95
Qty Add
13/24 – R&D Pro Pitch
13/24 – R&D Pro Pitch
R&D offers a select line of both Solas and Skat-Trak Impellers. The prop pitches listed have been tested to pass our standard of performance. They will deliver increased low end thrust and top end speed.

Our Price: $375.00
Qty Add
FZR Surge Protector Kit
R&D SHO/FZR Surge Protector Kit
The R&D Yamaha FZR Surge Protector Kit will significantly improve supercharger clutch and compressor wheel performance and reliability by eliminating damaging compressor surge. Compressor surge is defined as the negative charge of pressure that causes turbulence in the supercharger that occurs during aggressive deceleration or off-throttle operations. When the throttle valve is abruptly closed at high rpm’s the engine decelerates quickly down from 8,000 rpm’s, however the supercharger is compressing air (creating boost) as the supercharger has to decelerate from 80,000 rpm’s. This turbulence is the primary cause of undue stress on the supercharger compressor wheel, intercooler, clutch system, and its components. The R&D Yamaha FZR Surge Protection Kit utilizes an automotive vacuum assisted Bosch pressure blow off valve that releases the unwanted intake pressure between the throttle valve and the supercharger thus keeping the pressures in P1 and P2 equal. As soon as the throttle valve is opened, the blow off valve immediately closes and the compressor can supply its full boost potentials to the engine.

Our Price: $299.95
Qty Add
Yamaha SHO Intercooler Cooling Kit
R&D FZR/SHO Engine/Intercooler Cooling Kit
The R&D Yamaha SHO/FZR Engine/Intercooler Cooling Kit was developed for high performance recreational and racing use. Extensive engine cooling and inlet air temperature testing using both MoTeC I2 and Innovate digital logging systems has proven the R&D High Performance Cooling Kit to offer double the water volume flow through the engine, oil cooler, and intercooler as well as increase water pressure. The O.E.M. cooling system has a very low water pressure (10 P.S.I. at 7600 rpm’s) and a low water volume flow. The new R&D kit will double the water volume which will lower intake air temperature by 15-20 degrees as well as lower engine block and head temperatures by 40-50 degrees. The additional oil cooler water line will lower engine oil temperatures by 15-20 degrees promoting better lubrication and increased engine cooling. The R&D Cooling Kit arrives 100 percent complete with pre-cut hoses, “T” connectors, dual line pump block, through hull bulkhead fittings, hose clamps, water by-pass fittings, the thermostat removal sealing washer, and detailed instructions with pictures. R&D recommends the cooling system to be upgraded as a stand alone performance upgrade and a must have kit addition when installing power adders such as R&D Supercharger Wheels, Engine Performance Parts, and Engine Management Kit parts. Cooler engine, inlet air, and oil temperatures produce higher horsepower with decrease detonation.

Our Price: $249.95
Qty Add
SHO High Flow Exhaust Kit
Yamaha SHO FZR High Flow Exhaust Kit
The R&D SHO High Flow Exhaust Kit will add a noticeable low end and mid range power feel as well as add top end performance! The R&D High Flow Exhaust Kit will add a great performance sound to the SHO while maintaining a safe and under IJSBA and Coast Guard approved 86 db!

Our Price: $189.95
Qty Add
SHO/FZR Multi-Pressure Port Boost Gauge/Surge/RRFPR Adaptor Kit
SHO/FZR Multi-Pressure Port Boost Gauge/Surge/RRFPR Adaptor Kit
The R&D Yamaha FZR Multi-Pressure Port Adaptor Kit will allow quick and easy hook up of digital or manual boost gauges with the R&D Multi-port billet adaptor. The R&D Pressure Port Adaptor installs between the MAP sensor and the MAP sensor bracket as a “bolt on” part with no modifications. The adapter has two ports that allow for the operation of a vacuum/boost gauge, check plenum air temperatures, operate a surge protection valve, and operate a boost referenced fuel pressure regulator (RRFRP), or any two of these applications at the same time with one simple part. The R&D Pressure Port Adaptor Kit comes complete with longer MAP sensor mounting screws, o-ring seals, nylon cable ties, all mounting hardware and instructions.

Our Price: $59.95
Qty Add
SHO/FZR/FZS Power Core Intake Manifold Sleeve
SHO/FZR/FZS Power Core Intake Manifold Sleeve

Our Price: $29.95
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>