Performancecatalog.com

Enter your email address to Sign up for our newsletter

       You are here: Home > Watercraft > Freestyle > Kawasaki SX-R 800 > Hull Components
Sort By:
Page of 2
Hood Baffle Air Intake - Tube and Flange Kit
Hood Baffle Air Intake - Tube and Flange Kit
Our Price: $46.95

Direct water and air to where you want it in the engine compartment! Drop Tube and Urethane Flange for Hood Baffle Air Intakes. Use with either aftermarket hoods or stock factory hood to increase air flow. Each kit includes three oversize lengths of hose tubing, urethane flanges, and 2 part install epoxy. Bondable to hand laid fiberglass, carbon, SMC or ABS inner liners these are simple to install and are an excellent answer for air-starved motors. An EXCELLENT choice for the new Kawasaki SXR 800 with the Factory Pipe installed !
Digger Footwells- Stitched Pocket Inserts
Digger Footwells- Stitched Pocket Inserts
Our Price: $59.50

REQUIRED for use with Blowsion Digger stitched mat kits. The Digger footwell, due to its many curves and corners, was very hard to upholster with the stitched side mat, so we incorporated the stiched insert or "pocket" that is the first item glued down during a mat install. It is literally a glove fit wrap of the entire footwell area, and comes with a 1/4 " foam backing that installs behind it to soften the Naughyde feel of the footwell. The side mat then just simply mates up to the footwell pocket w/o actully having to curve into all the Diggers intricate compound curves. INSTALL OPTION: We actually have many customers that have used the naughyde pocket with Hydro Turf sides and bottom mat to avoid the pain of lining the footwells with HT. Sold as a pair.
Battery Box - Aluminum
Battery Box - Aluminum
Our Price: $69.95

Replace that cracked and worn out stock plastic battery box with bulletproof Blowsion aluminum. Each box includes all stock location retaining clips for easy exchange. Padded bottom. Direct fit replacement for all years Yamaha Super Jet, Fx1 and Polaris Octane. Can be fit as replacement to all Years KAWI 750 and SXR 800 with minor battery strap modifications.
Brap Strap
Brap Strap
Our Price: $99.95

Strap and secure your hood to avoid accidental dislodging during freestyle and freeride maneuvers. Replaces stock latch assembly. All mounting hardware included. A must for extreme ocean and big wave riders. "Cinchable" strap tension means you pre-load strap holding power. Fits all SJ, SXR800, FX1,750sxi and Octane. EJ-Pam 2008 approved! NOTE: Must be used carefully as over-tightening can damage OEM or composite hoods.
SXR One way valve kit
SXR One way valve kit
Our Price: $99.95
Currently Unavailable

Duckbills got you down and leaking? Our SXR flow valve design prevents water getting in by during tail stands, wave jumping, or all out buoy shredding. The aluminum, rubber, and injection molded construction of our one way valves along w/ the internal mounting results in a bulletproof set-up. Each pre-assembled kit includes explicitly detailed instructions specific to the SXR bulkhead issues etc...(the time saving coring tool hints are worth the kit price alone), two Blowsion molded glueable urethane bulkhead and ski flanges for leakless sealing, recessed one way flow valve, special flex tubing (allows for off center mounting unlike straight PVC tube scupper systems) mounting epoxy and stainless fasteners. NOTE: recommend Blowsion 2 part mixing foam pint kit wih install (PART # AWMA100). Expanding Foam Pint Kit or, Expanding Foam Quart Kit
SXR800 Stainless Hood Latch Assembly
Stainless Hood Latch Assembly
Our Price: $149.95

Fits all Kawasaki 650/750/SXR 800/X2. Comes complete with latch assembly and hood clip. 100% polished stainless. Trick and functional. Why incur the factory OEM replacement expense?
Footwells Dawson Digger
Footwells - Dawson Digger
Our Price: $149.95

These hand-laid, molded fiberglass insets provide extended room in the tray of your ski to position your feet. Comfortably sized for average feet (sizes 6-11), these footwells also feature a gentle protrusion over the top of your foot for better locking power. We offer pre-cut mat kits for all applications of our Digger footwells in both Blowsion Stitched or Blowsion Hydro-turf material. Our optional stitched inserts are also available for easy insert upholstering with eother mat option. Built with safety and performance in mind, the Diggers will keep you in your ski while inverted and also easily let you go when you feel like you're going to buy the farm.

You'll probably also want our Installation Materials Kit

Recommended Applications: Yamaha SuperJet(all years) and 94-95 Fx1, Kawasaki 750 SX/SXi/Sxi Pro and Polaris Octane.
Recreational Footwells
Footwells - Recreational
Our Price: $149.95

The Originals ! These hand-laid, molded fiberglass insets provide extended room in the tray of your ski to position your feet. Will fit and work in all models of wtercraft. Flush mount. Perfect for those riders that do not want any footwell extrusion into the tray.

You'll probably also want our Installation Materials Kit
Footwells Klowners
Footwells - Klowners
Our Price: $149.99

Designed especially for the rider who need MAX room in the tray.(AKA known as Klown Shoe wearers) These hand-laid, molded fiberglass insets provide extended room in the tray of your ski to position your feet. Comfortably sized for large to very large feet, the Klowner footwells contour to your ankle and also feature a gentle protrusion over the top of your foot for better locking power. Built with safety and performance in mind, the Klowner footwells will keep you in your ski while inverted, and also easily let you go when you feel like you're going to need a hurried dismount to avoid facial impact. NOTE: Most ski installations require modification to the footwell or the ski on the right hand side of the tray to accommodate for the internal rear exhaust tube. This may reduce the size of the footwell slightly in this area. Please e-mail for more sample install pictures!

You'll probably also want our Installation Materials Kit
MacCluggage Mashers Footwells
Footwells - MacCluggage Mashers
Our Price: $149.99

No Cutting of the wide SXR tray required. Designed in conjunction with Pro Kawi rider Chris MacCluggage and Darren Hedlund. Experience the feel of a standard footwell cut out without having to notch out your SXR tray. 100% race legal.

You'll probably also want our Installation Materials Kit