|
|
|
|
|
XLT1200 Riva Stage II Kit
| Stock |
56-57 mph @ 7,080 rpm |
| Stage I Kit |
62+ mph @ 7,150 rpm |
| Stage II Kit |
62+ mph @ 7,200 rpm |
|
|
Parts Price Total: $1,871.07
Price if Purchased as Kit: $1,712.15
You save $158.92!
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
RIVA XLT Performance Cylinder Head Kit (66V)
Precisely machined pump gas combustion chambers are designed to produce 145-150 LBS compression (valves down) at sea level elevation, significantly boosting motors performance and throttle response.
Optional girdled hardware kit prevents cylinder cracking by clamping cylinder between head and cases.
Utilizes OEM head gasket and is powder-coated to prevent corrosion.
Includes all necessary hardware and installation instructions.
Note: Girdled Hardware Kit Sold Seperately
|
|
Our Price: $424.95
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Solas Concord Impeller, 12/18 Degree, 155mm (66V) YAM
Solas Concord and Super Camber Impellers will increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation.
|
|
Our Price: $229.95
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
RIVA GPR Flame Arrestor Kit (66V)
Fits Yamaha 1200 Powervalve motors. Designed to increase airflow to your carburetors and allow your engine to produce more HP. Kit fits 44mm OEM carburetors. Includes stainless capped, screen type flame arrestors built to our specifications by K&N, anodized aluminum carburetor adapters, water-repellent pre-filter covers and all necessary hardware. NOTE: Removal of catalytic converter is required prior to installation. Please see our Exhaust section for replacement alternatives.
|
|
Our Price: $222.00
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Riva Pro-Series Sponson Kit, Yamaha XL | XLT all
Significantly improves the handling characteristics of XL1200Ltd, XL800 and XLT800/1200. Unique blade design improves cornering and cures symptoms of craft pulling from side to side in choppy conditions. Designed for easy installation using original mounting studs. Includes necessary hardware and instructions.
|
|
Our Price: $199.95
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
R&D XL Ltd / XLT Ride Plate
One of the best bolt-on performance enhancements you can do to your watercraft is to improve upon its handling and stability. Whether you're a recreational rider or a world championship contender looking for the ultimate performance, R&D Ride Plates offer unparalleled stability, handling, and control. Today's watercraft are capable of unbelievable performance and top speed levels. Voted #1 by the readers choice awards, R&D Ride Plates have been tested far beyond the limits of these new breed of machines. When you're going fast, you need total confidence. R&D Ride Plates are designed for the ultimate ride.
|
|
Our Price: $174.95
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
RIVA Boyesen Reed Stuffer Kit, Yamaha 1200/1300 PV (66V/60T) 3 pcs
Riva precision aluminum reed stuffers were designed to increase fuel/air velocity through the intake tract, resulting in increased throttle response and acceleration. These stuffers fit your stock reed cages and match perfectly with the original intake manifold. Will not warp or loose shape like traditional plastic stuffers. A very economical bolt-on performance
|
|
Our Price: $169.95
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
RIVA Girdled Head Hardware Kit
Optional girdled hardware kit prevents cylinder cracking by clamping cylinder between head and cases.
|
|
Our Price: $164.80
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
R&D Aquavein Intake Grate, Yamaha XLT / SUV
The R&D XLL / SUV Aquavein Intake Grate is now available. This Intake Grate is the only Intake Grate on the market that improves hook up, handling, acceleration and adds top speed. Easily installs in minutes using basic tools.
|
|
Our Price: $107.06
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
R&D YAM. XLL/XLT 1200 ANTI-CAVATION PUMP CONE
The unique patent pending design balances the bowl pressure in the last stage of the pump to eliminate detectable cavitation. Improving bottom end punch, midrange pull and overall performance. Recommended for use with Limited and Superstock watercraft.
|
|
Our Price: $91.87
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
RIVA XLT Pump Seal Kit
Dramatically reduce cavitation and prop spin with our easy to install Pro Pump Seal Kits. Location specific, molded inserts fill the voids in OEM pump inlet shoe that bleed air into pump causing cavitation. Recommended for modified craft using aftermarket intake grates. Includes detailed installation instructions.
|
|
Our Price: $79.95
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Riva Cat Removal D-Plate
The Riva “D” plate is a low cost product that directly replaces the catalytic converter in the GP1200R, XL1200Ltd, XLT1200, and GP1300R. Installation increases top-end speed, reduces under-hood operating temperatures and allows the use of regular 2-stroke oils. This unit is a high quality stainless steel replica of the plate that is standard equipment on export model Yamaha watercraft without emission controls.
Please note, you will also need this chip to make the conversion
|
|
Our Price: $74.99
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Cat Temp Sensor Chip Yamaha 1200 | 1300 PV (66V/60T)
The Riva Cat Temp Sensor Chip is a must when removing the OEM catalytic converter on Yamaha 1200 Powervalve engines. The circuit is designed to mimic the signal sent to the OEM CDI by the catalytic converter’s temperature probe preventing CDI flutters, warning devices sounding and engine shut downs due to cat removal. Can be used with stock or modified OEM CDI’s. Plugs directly into factory wiring harness.
|
|
Our Price: $19.95
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
