Performancecatalog.com

Enter your email address to Sign up for our newsletter

       You are here: Home > Watercraft > Supercharger & Intercooler > Yamaha > Intercooler / Powercooler Kits
Sort By:
Page of 1
FZ/SHO Intercooler CFM Kit SHO/FZR POWER CORE INTAKE/INTERCOOLER CFM KIT GEN-1 Power Cooler Aluminum Tube Kits
Our Price: $51.95
Our Price: $79.95
Our Price: $149.95
FZR Intercooler CFM Kit FZR POWER CORE INTAKE GEN1 Aluminum Tube Upgrade Kit
The R&D FZR Intercooler CFM Kit was developed to increase airflow into and through the intake system by relieving restrictions. The R&D Intercooler Spacer will unlock a 30-35 CFM restriction in the intercooler. The R&D FZR Intake Kit will add low end and mid range throttle response, and up to 100 rpms to top end performance to a stock FZR. The R&D FZR Intake Kit is an absolute must have part to remove intake restrictions before contemplating power adding compressor booster wheels kits to the Yamaha FZR engine. True horsepower gains on the Yamaha FZR start right here with the R&D intercooler CFM Kit. More airflow will equal more power. The R&D FZR Power Core Intake Manifold and Intercooler CFM Kit was developed to increase airflow into and through the intake system by relieving restrictions. The R&D FZR intake manifold ribbon remover sleeve will unlock a 40 CFM (cubic feet per minute) air flow restriction by replacing the intake manifold ribbon with the R&D billet venturi sleeve. The R&D Intercooler Spacer will unlock a 30-35 CFM restriction in the intercooler. The R&D FZR Intake Kit will add low end and mid range throttle response, and a full 100 plus rpms to top end performance to a stock FZR . The R&D FZR Intake Kit is an absolute must have parts kit to remove intake restrictions before contemplating power adding compressor booster wheels or turbo charger kits to the Yamaha FZR engine. True horsepower gains on the Yamaha FZR start right here with the R&D Intake Kit. More airflow will equal more power, and there is no other way around the fact that restricted is restricted power. Aluminum Tube Upgrade Kit for RIVA 'GEN-1' Power Cooler Kits. Also fits a variety of aftermarket intercoolers with same duct configuration as RIVA "GEN-1" Power Cooler. Includes high-strength, mandrel bent aluminum tubes with adapter flange to accommodate our RIVA Performance Blow-Off Valve Kit, RIVA Pro-Series Blow-Off Valve Kit or RIVA Blow-Off Valve Block-off Kit . Tubes are powder coated to protect from corrosion.
SHO/FZR Stage 1 Intercooler Core Kit R&D Pro Limited Intercooler Kit, Yamaha RIVA Pro-Series Gen-2 Power Cooler Kit FX-SHO FZR FZS
Our Price: $499.95
Our Price: $895.00
Our Price: $1,149.95
FZR Stage 1 Intercooler Core Kit R&D Pro Limited Intercooler Kit Riva Pro-Series Power Cooler Kit Yamaha FXSHO FZR FZS
The new R&D Performance Intercooler Power Core Kit was developed to replace the over restrictive OEM intercooler with an inexpensive direct replacement core that will bolt in to the OEM stock location with all stock hardware. The R&D Intercooler Core reduces the deadhead air restriction (similar to the R&D Intake Core Kit) that is created when installing a C1 Monster compressor wheel with a 3-4 pound boost pressure gain. The R&D intercooler offers better cooling efficiency with an aluminum 8 core design over the stock copper 6 core design. The R&D core will flow more air, offer better cooling efficiency, and allow the C1 Monster Wheel to live up to its airflow volume potential. The R&D Yamaha SHO/FZ/FZR Pro Limited Intercooler Kit was developed to directly replace the restrictive O.E.M. intercooler. The new R&D design offers high performance affordable intercooling that will bolt into the OEM stock location utilizing the OEM inlet cover, and all stock hoses and hardware.
The new R&D intercooler is I.J.S.B.A. / A.P.B.A. Limited Class legal, complying with rule book regulating aftermarket intercooler size. The R&D Intercooler has been specifically designed, sized, and routed to also comply with the I.J.S.B.A.’s 25% rule.
The new R&D Pro Limited Intercooler Kit is constructed from aircraft aluminum and is extremely easy to install, removes quick for cleaning and winter storage, is ultra strong, and rubber mounted so vibration will not compromise the long term performance.
This new Intercooler has been tested against every manufacturers complying intercooler, and has proven to out flow, out cool, and out power them all. The R&D intercooler offers better cooling efficiency through its “made in the USA” aluminum core design that easily out performs cheaper inefficient intercooler cores known to crack, leak and cause extreme detonation. The R&D Pro limited intercooler core will flow more air, deliver better cooling efficiency, and allow C1, C3, and C5 Monster Wheels to live up to their airflow volume and power potential.
Tested to 200-205 KPA or 14.5-15.2 Psi. of boost @ 90-100 degree air temp, the new R&D Pro Limited intercooler design drastically reduces deadhead air restriction producing ultra responsive “POWER NOW” acceleration all the way through the RPM range. All data and air temp was logged with a MoTeC M400 with i2 logging software. It should be noted that pressure data was taken in the plenum with the stock MAP sensor (not a boost gauge)....
The R&D Pro Limited Intercooler Kit also has an incorporated integral flange which will allow the easy bolt on addition of a Greddy RZ Blow-off valve (Pt. # 613-95261) which can be adjusted to regulate boost, and compressor surge blow-off under deceleration.
The RIVA ‘GEN-2’ Power Cooler intercooler system features a new high-capacity cooler element that is rated for up to 500hp! Huge cooler core resists heat soak under the most demanding high boost/high temperature applications. Delivers an increase of 20 peak horsepower over OEM intercooler providing arm-wrenching results on the water. Quality manufacturing of cooler core delivers minimal pressure drops and excellent thermal efficiency. The cooling element is dramatically more efficient than the stock unit with exit temperatures averaging 60°F cooler than stock. This delivers cooler, denser air for increased performance throughout the RPM range. Innovative design allows easy disassembly of cooler element & ducting for maintenance and cleaning. Features integrated blow-off valve mount that will accept RIVA/HKS Blow-Off Valve kit (sold separately) for improved supercharger reliability and performance. Power Cooler installs securely with shock absorbing rubber mounting system and stainless steel hardware. Kit contains all necessary hardware and detailed installation instructions.


Key Features Include:

  • Large cooler element rated for 500hp.
  • Designed to allow easy disassembly of cooler element & ducting for cleaning.
  • Integrated mount for optional RIVA/HKS Blow-Off Valve Kit (sold separately).
  • Includes billet "high flow" pump strainer providing a dedicated waterline to Power Cooler.
  • Replaceable sacrificial zinc anodes protect cooler element from corrosion.
  • Quick release flushing system keeps Power Cooler at peak performance.
Note: Power Cooler requires use of one of the following components:
 
Fits Models  FX SHO / FZR / FZS
R&D High Performance R4 Intercooler Kit R&D High Performance R5 Intercooler Kit, Yamaha
Our Price: $1,495.00
Our Price: $1,695.00
R&D High Performance R4 Intercooler Kit R&D High Performance R5 Intercooler Kit
The new R&D Intercooler System will efficiently decrease superheated air temperatures produced by high performance Superchargers. Designed for 300+ horsepower applications and recommended for the R&D C3 Monster compressor wheel. Kit comes complete with Bosch surge protection blow-off valve. The new R&D Intercooler System will efficiently decrease superheated air temperatures produced by high performance Superchargers. Designed for 400+ horsepower applications and recommended for the R&D C5 Monster compressor wheel. Kit comes complete with Bosch surge protection blow-off valve.