Performancecatalog.com

Enter your email address to Sign up for our newsletter

       You are here: Home > Watercraft > Performance Packages > Sea-Doo > RXT-X aS 260 | RXT iS 260 Stage 2 Kit
Sort By:
Page of 1
Riva Racing Sea Doo RXT-aS | RXT iS Stage 2 Kit
Riva Racing Sea Doo RXT-aS | RXT iS Stage 2 Kit

Stock (U.S. Model) 67 MPH @ 7,800 RPM
Stock (International Model)

68 MPH @ 7,800 RPM

Stage 1 Kit 72 MPH @ 7,900~8,000 RPM
Stage 2 Kit

74 MPH @ 8,300 RPM

Stage 3 Kit 77 MPH @ 8,550 RPM
Stage 4 Kit

80~81 MPH @ 8,750 RPM


Parts Price Total: $2,574.70
Price if Purchased as Kit: $2,458.00
You save $116.70!
Qty Add
RIVA Athena Pro-Series Sea-Doo iControl ECU
RIVA Athena Pro-Series Sea-Doo iControl ECU

The RIVA/ATHENA Pro-Series iControl ECU provides a huge performance advantage to Sea-Doo iControl models delivering over 40hp to the stock 4-TEC engine. ECU is fully programmable with either RIVA supplied mapping or user adjustable parameters. Most calibrations require 91+ octane pump fuel. Plugs directly into factory wiring harness via waterproof connectors.

Key Features Include:

  1. Eliminates restrictive GPS speed limiter.
  2. Enables craft to start in SPORT mode for full power delivery.
  3. Easy loading of supplied calibrations/maps for various performance applications.
    • Performance Fuel Mapping: Delivers optimal fuel required for your specific level of modification based on boost pressure.
    • Performance Timing Curves: Special racing curves produce more power throughout the RPM range.
    • Rev Limiter Increase: Stock rev limit can been increased so engine RPM can be run higher producing more boost pressure and horsepower.
    • Boost Control for turbo applications. (Plug & play connector for wastegate solenoid).
  1. Ability to customize RIVA calibrations for special applications. Using supplied software, user can adjust parameters such as Fuel, Timing, Rev Limiter & Boost Control.
  2. Retains all iControl functions.
  3. Retains all OEM dash display functions & Engine Safety Functions.
  4. Includes an integrated barometric sensor that automatically compensates for altitude.
  5. Includes plug & play connector for RIVA Dash/Logger unit (RY11840-LD-MD60).
  6. Includes plug & play connector for optional lambda sensor kit (part# RY11540-LC1-6S5) for data logging air/fuel ratios & tuning functions.
  7. Direct-Connect design eliminates need for auxiliary wiring harness.
  8. Individual Cylinder Knock Control function protects engine. System identifies which cylinder is detonating by tracking firing order utilizing OEM knock sensor.
  9. User selectable dual calibration capacity.
  10. Provides an easy-to-use diagnostic system that monitors all engine sensors. Users can easily diagnose & clear faults codes via a computer connection with supplied software. This eliminates the need for the B.U.D.S. diagnostic & service took, which is exclusive to BRP dealers only.
NOTE: RIVA Pro-Series ECU is for competition use only.

Our Price: $1,299.95
Qty Add
Riva Fuel Pressure Regulator Kit
Riva Fuel Pressure Regulator Kit, Rising Rate; SD 4-TEC `08 and Newer
Our Fuel Pressure Regulator Kits provide the precision pressure control necessary to compliment a variety of performance applications. Kits are fully assembled & mount securely via sturdy stainless steel bracket. High quality billet pressure regulator can adjust base pressure from 25 to 80 PSI. Unit can also be set up as rising rate fuel pressure regulator at a 1 to 1 ratio providing one additional pound of fuel pressure for every pound of boost gain. Plugs directly into original fuel system with OEM connectors and features a large 3/8" fuel return line. Includes integrated liquid-filled pressure gauge and billet Fuel Pressure Regulator Block-off necessary for removal of stock fuel pressure regulator.

Our Price: $384.95
Qty Add
Solas Concord Impeller
Sea Doo Solas R-Series Concord Impeller - 15/19R
Featured on Riva Racing Stage 1 Kit for RXP-X & RXT-X models.

Our Price: $329.95
Qty Add
RIVA Sea-Doo RXT/GTX iS/aS Power Filter Kit
RIVA Sea-Doo RXT/GTX iS/aS Power Filter Kit
Delivers greatly improved acceleration and top speed increase by replacing the
restrictive stock intake system. The Power Filter® dramatically increases air
flow to your supercharger via a large 4” diameter intake duct and oversized
K&N filter element. Ducting is precision formed from a race proven composite
that will not conduct heat to incoming air. Installs securely to supercharger
via a tapered velocity stack, silicone coupler and stainless steel clamps.
Includes pre-filter element. NOTE: Sea•Doo and RIVA both strongly recommend the
use of premium octane (91+) pump fuel in your Supercharged watercraft.

Our Price: $269.95
Qty Add
SeaDoo OEM Intake Manifold Upgrade Kit | RXP-X/RXT-X
SeaDoo OEM Intake Manifold Upgrade Kit | RXP-X/RXT-X
Our Intake Manifold Upgrade Kit enables your engine to produce more horsepower through increased boost pressure (+1lb). Supplied hole cutting tool allows easy removal of restrictive screen element from inside of intake manifold. Special o-ringed, billet block-off plug with integrated fitting for aftermarket boost pressure gauge fills opening left after removal of screen element. Includes detailed installation instructions. NOTE: Our testing has determined the stock ECU will compensate for the increased boost provided by our Intake Manifold Upgrade Kit.

Not IJSBA & APBA Stock & Limited Class legal. Stock element must be removed through opening where throttle body mounts to intake manifold.


Our Price: $169.95
Qty Add
SeaDoo Engine Breather Catch Can Kit  255/215/185
SeaDoo Engine Breather Catch Can Kit 255/215/185
Easy to install catch can/oil breather eliminates power-robbing crankcase fumes and oil vapor from your engine's air intake. Increases horsepower by removing the engine's requirement to burn relaitvely non-combustable oil. Also improves intercooler efficiency by preventing the oil sludge coating that lowers thermal efficiency. Excess oil vapor is routed to our translucent catch can where it condenses and collects for occasional draining via integrated petcock valve. Kit includes K&N breather and Sea-Doo mounting bracket along with all neccesary hardware & installation instructions.

Our Price: $134.95
Qty Add
SeaDoo RXT-X 260 | RXP-X 260  Free Flow Kit
Riva SeaDoo Free Flow Exhaust Kit RXT-X 260 | RXP-X 260
Replaces the restrictive sound suppression system located between the water box and hull exit on your watercraft. Improves engine performance by reducing back pressure and harmful detonation. Includes mandrel bent aluminum tubing that is powder coated to prevent corrosion, high-temp silicone replacement coupler and installation instructions.

Fits all Sea-Doo models with S3 hulls including RXT-X 260, iS & aS units.

Our Price: $129.95
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>