Performancecatalog.com

Enter your email address to Sign up for our newsletter


  Home > Yamaha >

R&D YAMAHA RC2 RACING CAM KIT - FZ/FZR/SHO

R&D RC2 RACING CAMS


 
Our Price: $749.95


Product Code: 612-93010
Qty:

Description
 
R&D’s new RC2 Racing Camshaft kit offers a serious boost in horsepower for the racer who wants as much lift and duration that can be safely “Bolted In” without valve guide or spring base machining.  The R&D RC2 Cam lobe profile has all of the same features in concept and design as our RC1 recreational lobe, accept for the increased lift and duration.  The secret to the R&D cam lobe is in the precision grind finish on the cams base circle and duration at .050”.  R&D maintains strict specifications in this area of the cam lobe which is the key to having strong vacuum, a great idle tune, and clean acceleration performance.
Overall lobe Lift and Durations are increased to allow as much lift as possible and still run O.E.M. “uncut” valve guides. R&D has improved the lobe profile with “state of the art” technologies that will reduce valve lifter friction and improve valve lifter wear. The R&D “boost friendly” lobe profiles increased lift and duration will produce a noticeable horsepower gain and can also be tuned to custom LSA (lobe separation angles) when using R&D “Pro Tune” Cam Gears (Pt. # 612-93008).  The R&D RC2 will produce noticeable horsepower gains over R&D RC1 recreational cams with improved gains from idle to wide open throttle.  The RC2 Cam Kit really goes to work adding top end pulling power in the 8500-9500 rpm zone. R&D custom cams can be installed easily and shimmed with basic hand tools and the O.E.M. service manual.  R&D High Rev Valve Spring and shim kit parts are required for the RC2 Cam Kit to work properly without coil bind damage.  Call R&D today for further details and specifications for all your camshaft and valve train upgrades.

NOTE: The R&D RC2 requires the installation of R&D’s High Performance Valve Spring kit as the O.E.M. valve springs will run into coil bind with the added lift on the RC2 lobe profile.  The RC2 will also require the use of a stand alone ECU system such as a MoTeC M400 to custom tune the fuel and ignition for optimum performance.
Features
    • Aggressive throttle response, increased overall horsepower
    • Increased rpm performance ( RPM range increased to 9500)
    • Increased CFM airflow
    • Horsepower increase gain ( with R&D Cam Gears)
    • Aftermarket ignition is required for custom tuning
    • Works well with R&D Valve Spring Kit upgrades (Required)
    • Easy installation
    • Bolt on 25+ Horsepower Upgrade   
  •  

  • NOTE:  The R&D RC2 Racing Camshaft Grind Specifications have been Race Proven during the 2009 and 2010 racing seasons. No other camshaft has more lift and more duration than the RC2.  The nearest competitor to date is the Yamaha 1800 N.A. Cam with a total lift average of .368”. That puts the RC2 a full .020” higher. R&D has worked hard in the duration curve area of the cam paying careful attention to the duration at .050” and overall added duration. R&D is currently working on the RC3 Racing Cam available in mid October. The R&D RC2 camshaft kit is a performance modification that is performed in a normal 2-3 day turnaround to your existing camshaft cores.  R&D also stocks Camshaft kits that can be mail ordered direct with a reasonable additional cam core charge. R&D suggests that the FZ/FZR, and SHO supercharged engines should benefit greatly from a supercharger or turbocharger specific cam lobe profile design and custom LC and LSA set up.

  •  


      Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

Yamaha
Watercraft > Engine